Micro Trawler Build
1 scarfing the sides
1 Assembled bulkheads
1 Assembling bulkheads
1 Assembling bulkheads
1 Assembling the keel
1 Bracing
1 Building bottom panels
1 Building cabin
1 Building cabin
1 Building cabin
1 Building the keel
1 Final epoxy
1 Final epoxy
1 Finished keel side
1 Finished keel transom
1 Glassing bottom
1 Hull turned over
1 Installed stem
1 Installing gastanks
1 Installing the cockpit floor
1 Installing the rubrail
1 Painted front view
1 Painted rear view
1 Painted side
1 Painted stern
1 Painting bottom
1 Sanding the hull
1 Scarf joint
1 Stem setup
1 Turning over
1 Turning over
1 Turning over
1 Turning over
1 Turning over
2 Assembling keel
2 Building sponsons
2 Building sponsons
2 Clamping bulkheads
2 Clamping bulkheads
2 First Turn
2 Glassing the hull
2 sanding hulls
2 Scarfing wood
2 Turned hull
3 Putting top on
3 Putting top on
4 Adding insulation
4 Assembled hull
4 Assembled hull
4 Assembling floor
4 Assembling keel
4 Attaching keel
4 Bottom of hull
4 Building pilot house
4 Building the bulkhead
4 Building the doors
4 Clamping keel
4 Cockpit hatch
4 Epoxing the hull
4 Fillet seams
4 Floor stringer
4 Glassing deck
4 Glassing inside hull
4 Glassing inside hull
4 Glassing inside hull
4 Glassing inside seams
4 Glassing the hull
4 Glassing the hull
4 Glassing the seams
4 Hull rightside up
4 Hull upside down
4 Installing bulkhead
4 Installing bulkhead
4 Installing bulkhead
4 Installing deck
4 Installing floor stringers
4 Installing gas tank
4 Installing keel
4 Installing portholes
4 Installing transom
4 Installing upper deck
4 Installing upper deck
4 Installing window frames
4 Installing window frames
4 Installing window frames
4 Interior work
4 Interior work
4 Interior work
4 Interior work
4 Interior
4 Interior
4 Keel
4 Painting bottom
4 Painting Interior
4 Panel layout
4 Sanding
4 Sanding
4 Scarfing panels
4 Stem installed
4 Washing off the blush
5 Adding sponson
5 Bottom
5 Bottom
5 Step keel
All Rights Reserved Common Sense Boats
© 1999 -2012